這是歷史版本頁面 — 看 AMD Catalyst Drivers (XP 32-bit) 最新版本

XP 32-bit 老電腦顯示卡驅動,AMD Catalyst 還能裝嗎

AMD Catalyst Drivers (XP 32-bit) 軟體圖示 AMD Catalyst Drivers (XP 32-bit) ATI Catalyst Drivers 10.10 XP 資料更新 2010-10-24 閱讀約 6 分鐘

還在用 Windows XP 32-bit 的老電腦,想玩遊戲或看影片卻發現畫面卡頓、顏色怪異,甚至有些程式一開就當機。你心裡知道問題可能出在顯示卡驅動程式,但打開裝置管理員看到「標準 VGA 圖形介面卡」,又不知道該去哪裡找對應的驅動。明明顯示卡是 AMD Radeon 系列,官網卻只放最新系統的驅動,下載回來安裝時直接跳出「不支援此作業系統」。

一般人遇到這種狀況,會先試 Windows 內建的自動更新,但 XP 早已停止支援,更新服務形同虛設。手動去裝置管理員更新驅動,系統往往回覆「已是最新」,實際上用的還是微軟陽春的通用驅動,3D 加速、HDMI 音訊、多螢幕輸出全都無法啟用。這類驅動工具的存在,就是為了補上這個缺口——讓舊系統能完整發揮顯示卡硬體功能,而不是只能顯示桌面而已。

01AMD Catalyst Drivers (XP 32-bit) 到底是做什麼用的?

這是 AMD 官方為 Radeon 顯示卡在 Windows XP 32-bit 系統上設計的驅動程式套件。安裝後,系統才能正確辨識顯示卡型號,啟用 DirectX 與 OpenGL 的硬體加速,讓遊戲、多媒體播放、繪圖軟體能呼叫 GPU 的運算能力。沒有它,顯示卡就只是個能輸出畫面的零件,3D 效能完全無法發揮。

02裝了這套驅動之後,我能多用到哪些功能?

根據官方說明,它提供多螢幕輸出設定、3D 畫質調整(反鋸齒、紋理過濾、紋理品質)、D-Sub 與 HDMI 連接設定、透過 HDMI 傳輸聲音、顯示卡溫度與風扇轉速監測,以及內建的 GPU 超頻工具。這些功能在未安裝驅動的狀態下都無法使用,特別是 HDMI 音訊,沒裝驅動就只會是靜音。

03我主要是玩遊戲,裝這個驅動對遊戲效能有幫助嗎?

有幫助。遊戲普遍透過 DirectX 或 OpenGL 與顯示卡溝通,而這套驅動正是負責讓這些 API 能完整存取 Radeon 顯示卡的運算資源。沒有正確的驅動,遊戲可能無法啟動、貼圖錯誤或嚴重掉幀。安裝後,系統才能將遊戲的繪圖指令正確交給 GPU 處理,效能才會恢復到顯示卡原本應有的水準。

04安裝過程會不會很複雜?我對電腦不熟。

官方說明指出,這套驅動採用精靈引導式安裝,照著步驟點下一步就能完成。安裝前建議先移除舊的顯示卡驅動,避免版本衝突。安裝完畢後重新開機,系統就會以新的驅動運作。整個過程不需要手動修改任何設定檔,對不熟悉電腦操作的人來說,門檻不高。

05它除了玩遊戲,對一般使用或看影片也有幫助嗎?

有。多媒體播放時,影片解碼與畫面輸出都需要 GPU 參與,正確的驅動能確保影片播放流暢、色彩正常。對一般使用者來說,穩定的驅動也代表桌面操作不會突然畫面凍結或出現雜訊。官方說明中特別提到,這套驅動能讓一般使用者、多媒體愛好者、遊戲玩家與專業設計師都能獲得各自需要的穩定性與功能。

06我還在用 XP 32-bit 的老電腦,適合裝這個驅動嗎?

如果你的顯示卡是 AMD Radeon 系列,而且系統是 Windows XP 32-bit,那這套驅動就是針對你的環境設計的。它收錄的版本從 2005 年到 2014 年,涵蓋多個世代的 Radeon 顯示卡,老電腦使用者可以在版本紀錄中找到對應自己顯示卡的驅動。安裝前先確認顯示卡型號,再挑選合適的版本即可。

07我電腦只是拿來上網和看影片,顯示也正常,還需要裝嗎?

如果目前畫面輸出正常、影片播放沒有問題,不裝也可以。但要注意,未安裝官方驅動時,系統用的是微軟通用驅動,HDMI 音訊輸出、多螢幕延伸、硬體加速等功能可能無法使用。如果你不需要這些功能,維持現狀不會有立即的危險;若日後遇到影片卡頓或畫面異常,再回頭安裝這套驅動即可。

08我的系統是 Windows 10,可以裝這個 XP 版本的驅動嗎?

不行。這套驅動明確標示支援 Windows XP 32-bit,不適用於 Windows 10。微軟的作業系統架構差異很大,舊版驅動在 Windows 10 上安裝可能會失敗,甚至造成系統不穩定。Windows 10 使用者應該尋找對應 Windows 10 的 AMD Catalyst 驅動版本,而不是使用這個 XP 專用版本。

09這個驅動很久沒更新了,裝了會不會有安全疑慮?

根據版本紀錄,這個驅動系列最後一次更新停在 2014 年,之後就沒有新版本釋出。這代表它不會再獲得任何修補或功能更新。Windows XP 本身也早已停止支援,系統漏洞不會再被修補。如果你只是離線使用或安裝在沒有連接網路的舊機器上,風險相對可控;若會連網使用,整體安全性需要自行評估。

10我的顯示卡是 NVIDIA 的,可以裝這個驅動嗎?

不行。這套驅動是 AMD 為自家 Radeon 顯示卡設計的,無法用在 NVIDIA 顯示卡上。NVIDIA 顯示卡在 XP 32-bit 系統上應該使用 NVIDIA Forceware 驅動,兩者不能互通。安裝前請先確認顯示卡品牌,裝錯驅動不僅無法啟用功能,還可能導致系統顯示異常。

11我的系統是 64 位元的 XP,可以裝這個 32-bit 版本嗎?

不行。這套驅動明確標示為 32-bit 版本,不支援 64 位元系統。64 位元的 XP 需要安裝對應的 64-bit 驅動版本,兩者的核心架構不同,混用會導致驅動無法載入。請先確認系統位元數,再選擇相符的驅動版本,避免安裝過程中出現錯誤訊息。

下載與官方連結

前往官方網站

10-10_xp32_dd_ccc_enu.exe · 42.25 MB

版本紀錄

再看 5 筆

看完整版本清單

這一版改了什麼

What's new in this version:

# AMD Catalyst™ Accelerated Parallel Processing (APP) technology 
There will now be two variants of the AMD Catalyst package available:
1. AMD Catalyst (comparable to prior versions in features and components) –
currently includes the Direct3D®, OpenGL®, display driver and AMD
Catalyst Control Center components
2. AMD Catalyst Accelerated Parallel Processing (“APP”) technology Edition –
AMD Catalyst plus the OpenCL driver
- Users can still obtain the individual AMD Catalyst components as well (which will
also include the OpenCL driver as well)

# Video accleration for WMV HD® video content
- This release of AMD Catalyst provides video acceleration support for WMV HD®
(Microsoft video codec) under Windows 7
- Compatible with the ATI Radeon™ HD 5000 Series of products

# Enhanced Dynamic Contrast video controls

# Introduction of AMD HD3D Technology
- Blu-ray 3D™ Support
* This release of AMD Catalyst enables Blu-ray 3D™ playback
* Requirements include Blu-ray 3D player software, 3D supported display and 3D
Stereoscopic glasses
* Compatible with the AMD Radeon HD 6800 Series
- Stereo 3D Gaming Compatibility
* This release of AMD Catalyst enables Stereo 3D gaming via 3rd party Stereo 3D
Conversion Software from Dynamic Digital Depth (DDD™) and iZ3D™
* Requirements include 3D supported display and 3D Stereoscopic glasses
* Compatible with the ATI Radeon HD 5000 Series and AMD Radeon HD 6800 Series
*More information on AMD HD3D Technology, including Stereo 3D Conversion
Software and a list of supported displays, can be found at www.amd.com/hd3d

# Catalyst™ Application Profiles
The following application profiles are available with this release of AMD Catalyst 10.10:
- Multiplayer Medal of Honor™ (DirectX® 9/DirectX® 10/DirectX® 11) CrossFire™
update
- Darksider™ (DirectX 9) performance and CrossFire anti-aliasing update
- NBA 2K11™ (DirectX 9) CrossFire update
- Stone Giant™ (DirectX 10/DirectX 11) CrossFire update
- Civilization V™ (DirectX 10/DirectX 11) tweak CrossFire update
- H.A.W.X.™ 2 (DirectX 10/DirectX 11) CrossFire update
- Formula 1™ (DirectX 10/DirectX 11) CrossFire update
- World of Warcraft™ (DirectX 11) version CrossFire update

# Performance Improvements
The following performance improvements were observed with this release of AMD
Catalyst 10.10:
- Aliens vs. Predator™ DirectX 11 Benchmark
* Performance increases up to 6% on ATI Radeon HD 5800 Series single and
CrossFire
* Performance increases up to 5% on ATI Radeon HD 5700 Series single and
CrossFire
* Performance increases up to 5% on ATI Radeon HD 5600 Series
* Performance increases up to 5% on ATI Radeon HD 5500 Series
* Performance increases up to 4% on ATI Radeon HD 5400 Series
- BattleForge™
* Performance increases up to 6% on ATI Radeon HD 5800 Series single and
CrossFire configurations with anti-aliasing enabled
* Performance increases up to 5% on ATI Radeon HD 5700 Series single and
CrossFire configurations with anti-aliasing enabled
- Crysis Warhead®
* Performance increases up to 9% on Single ATI Radeon HD 5800 Series products
with anti-aliasing enabled
- Far Cry™ 2
* Performance increases up to 7% on Single ATI Radeon HD 5800 Series products
- Metro 2033™
* Performance increases up to 7% on ATI Radeon HD 5800 Series single and
CrossFire configurations
* Performance increases up to 8% on ATI Radeon HD 5700 Series single and
CrossFire configurations
* Performance increases up to 5% on ATI Radeon HD 5600 Series in DirectX 11
and 10 modes
* Performance increases up to 5% on ATI Radeon HD 5500 Series in DirectX 11
and 10 modes
* Performance increases up to 4% on ATI Radeon HD 5400 Series in DirectX 11
and 10 modes
- S.T.A.L.K.E.R.™ : Call of Pripyat Benchmark
* Performance increases up to 7% on single ATI Radeon HD 5800 Series products
- Unigine™ Heaven
* Performance increases up to 9% on ATI Radeon HD 5800 Series single and
CrossFire configurations with anti-aliasing enabled
* Performance increases up to 8% on ATI Radeon HD 5700 Series single and
CrossFire configurations with anti-aliasing enabled
- World in Conflict™
* Performance increases up to 9% on ATI Radeon HD 5600 Series
* Performance increases up to 10% on ATI Radeon HD 5500 Series

# Resolved Known Issues for All Windows Operating Systems
This section provides information on resolved known issues in this release of the AMD Catalyst software suite for Windows. These include:
- Catalyst Control Center page will now report the correct video memory type

# Resolved Known Issues for the Windows 7 Operating System
This section provides information on resolved known issues in this release of the AMD Catalyst software suite for Windows 7. These include:
* Screen no longer becomes static after changing resolution in Just Cause 2™ with CrossFire enabled under Multi-GPU configuration
* Secondary (Slave) GPU and Memory Clock values will now increase when D3D
samples/games are running in fullscreen mode
* The maximum support mode will now be properly displayed when the CRT is
connected via the DP-to-VGA dongle
* Negative CrossFire scaling no longer experienced in Need for Speed™: Shift 2 on the ATI Radeon™ HD 5870 card
* Tearing corruption no longer visible in Call of Duty®: Modern Warfare® 2 with
CrossFire enabled
* VGA display will now light up when hotplugged into the VGA port on a system
booted without any displays connected
* Changing the HDMI™ display output to 1776x1000 through the operating system resolution setting no longer causes the refresh rate to default to 30Hz
* Frame drops no longer visible during WinDVD® Blu-ray playback with display
resolution set to 25x16
* Changes to HDMI display scaling are now retained after system reboot
* System no longer displays blue screen during HDMI audio driver upgrade if existing version is not uninstalled prior to installation
* Unwanted desktop experience no longer visible while viewing Blu-ray content on
120 Hz displays

# Resolved Known Issues for the Windows Vista Operating System
This section provides information on resolved known issues in this release of the AMD Catalyst software suite for Windows Vista. These include:
- Optimized and custom modes for 720p60, 1080p60 and 1080i30 are no longer
missing for specific DVI displays
- Display no longer turns black when rotated 90 or 270 degress with resolution set to 1080i30 and Aero® enabled

AMD催化劑驅動AMD顯卡驅動下載AMD Catalyst XP版AMD顯卡驅動XPAMD顯卡驅動支援AMD驅動舊版Windows XP顯卡驅動XP 32位驅動XP顯卡驅動安裝