這是歷史版本頁面 — 看 eMule 最新版本
eMule 這款老牌 P2P 軟體現在還能拿來做什麼
你手上有一批老檔案、冷門資源,或是某個只在特定論壇流傳的壓縮檔。你試過一般下載方式,不是連結失效,就是速度卡在個位數 KB,不然就是檔案根本找不到。你真正需要的,是能連進一個還有人在上傳這些東西的網路,慢慢把檔案抓下來。
一般人遇到這種狀況,第一個想到的是開 BT 找種子,或是去免空碰運氣。但 BT 種子會死,免空檔案會被砍,而且這些管道對十幾年前的老檔案往往束手無策。這類工具的切入點,是透過一套歷史悠久、仍有人維護的 P2P 協定,直接去問網路上的其他使用者有沒有你想要的檔案——只要還有人開著軟體分享,你就有機會抓得到。
01eMule 到底是做什麼用的?
它是一套 P2P 檔案分享軟體,連上 eDonkey2000 和 Kad 兩個網路,讓使用者互相分享和下載檔案。你可以在裡面搜尋音樂、影片、軟體等各類型檔案,加入下載佇列後,從其他連線的使用者那邊抓取。它不依賴中央伺服器存放檔案,而是靠所有連線中的使用者彼此提供。
02這套軟體要怎麼找檔案?
在搜尋列輸入關鍵字,可以選分類縮小範圍,也支援布林運算子(例如 AND、OR)來過濾結果。搜尋到之後,雙擊檔案就會加入下載佇列。下載中的檔案可以在「Transfers」分頁看進度、速度和預估時間。如果檔案還沒抓完,也可以用預覽功能先確認內容是不是你要的。
03下載速度很慢,有沒有辦法讓它快一點?
官方說明提到幾個方向:連到容量較大的伺服器、開放更多上傳槽、確認防火牆和路由器設定沒有擋掉 eMule 的連線。另外,佇列管理系統可以讓你調整下載和上傳的優先順序。要注意的是,P2P 的速度本來就取決於對方願意提供多少上傳頻寬,不是軟體本身能保證的。
04它可以下載 BT 種子嗎?
不行。這套軟體是專門設計給 eDonkey2000 和 Kad 網路用的,不支援 BitTorrent 協定。如果你手上的資源是 .torrent 檔或 magnet 連結,需要另外用 BitTorrent、uTorrent 或 qBittorrent 之類的軟體來開。
05用這套軟體安不安全?
官方說法是一般情況下安全,但任何 P2P 軟體都一樣,要小心不要下載到沒有授權的版權內容。軟體內建 IP 過濾和訊息加密功能,可以在設定中開啟,增強隱私和安全性。另外,下載任何檔案前,最好自己確認檔案來源和內容。
06什麼樣的人適合用這套軟體?
適合還在用 Windows 系統、而且需要找老檔案或冷門資源的人。它連的 eDonkey2000 和 Kad 網路歷史悠久,有些在 BT 上已經死掉的資源,可能還在這個網路上流傳。如果你願意花時間掛著慢慢抓,而且能接受英文介面,它就有機會派上用場。
07我現在用 uTorrent 或 BitTorrent,有必要換成它嗎?
看你的需求。如果你主要抓的是 BT 種子,那不需要換,因為 eMule 不吃 BT 協定。但如果你要找的東西在 BT 網路上找不到,而你知道它可能在 eDonkey 或 Kad 網路上,那就可以兩套並存,各抓各的。它和 BT 軟體不是取代關係,是互補關係。
08它的介面只有英文,會不會很難上手?
介面確實只有英文,但官方說明強調它的介面設計直覺、對新手友善。主要功能就是搜尋、下載、管理佇列,這幾個操作在「Transfers」和「Search」兩個分頁就能完成。如果你完全看不懂英文,操作上會比較吃力,這點要自己評估。
09什麼情況不該選它?
如果你用的是 macOS 或 Linux,官方沒有正式支援,只有非官方版本或替代軟體,不建議把它當主要工具。如果你要抓的是 BT 種子,它完全幫不上忙。另外,它更新頻率很低,介面又只有英文,如果你希望軟體頻繁更新、介面有中文,那它不適合你。
10它和 uTorrent、BitTorrent 比起來,哪個比較多人用?
從評分人數來看,uTorrent 有 2143 人評分,BitTorrent 有 502 人,FrostWire 有 316 人,而 eMule 只有 80 人。評分人數少不代表軟體差,但可以反映使用者的基數。如果你在意的是「很多人用、比較不會踩雷」,那 uTorrent 或 BitTorrent 的使用者樣本數明顯大得多。
11這套軟體是不是已經沒在維護了?
它還是開源軟體,官方說明指出雖然更新不頻繁,但有一個社群開發者持續在維護。版本紀錄顯示近 24 個月內有過更新,所以還沒有到完全停擺的狀態。不過它的更新頻率確實比主流軟體低很多,如果你很在意軟體是否頻繁更新,這點要列入考量。
12它支援 Windows 11 嗎?
官方說明提到它相容於 Windows 11、10、8、7 以及更舊的版本。所以理論上在現行的 Windows 系統上都可以安裝使用。但要注意,它只支援 Windows,macOS 和 Linux 沒有官方版本,這點在選擇前要先確認自己的作業系統。
下載與官方連結
eMule0.49a_BETA1-Installer.exe · 3.14 MB · 連結指向軟體原廠
版本紀錄
- 2025-12-07 eMule 0.70b 4.07 MB
- 2023-08-26 eMule 0.70a 4.03 MB
- 2021-06-21 eMule 0.60c 4.08 MB
再看 5 筆
- 2015-03-20 eMule 0.50b Beta 1
- 2010-04-08 eMule 0.50a 3.2 MB
- 2010-03-31 eMule 0.50a Beta 3 3.23 MB
- 2010-03-22 eMule 0.50a Beta 2 3.23 MB
- 2010-03-12 eMule 0.50a Beta 1 3.23 MB
這一版改了什麼
What's new in this version:
0.49a BETA1
-----------------------
- April, 12. 2008 -
-----------------------
.: Beta versions now create a small test text file which is shared by eMule to help us debugging protocol changes (esp Kad). On exit this file is deleted
.: Fixed a bug with the "Open Directory" menuitem in the shared files window [Stulle]
-----------------------
- April, 11. 2008 -
-----------------------
.: Added the obfuscation setting to the First Time wizard and removed the full chunk upload setting instead
.: Disabled peercache downloads by default (deprecated)
.: Added a Beta nagging dialog
-----------------------
- Apr, 6. 2008 -
-----------------------
.: Fixed several bugs in the new Kad firewall testing, obfuscation and direct callback functions
-----------------------
- Mar, 30. 2008 -
-----------------------
.: eMule is now aware of windows standby modes and reconnects after waking up [MorphXt]
-----------------------
- Mar, 18. 2008 -
-----------------------
.: Fixed: File tooltips used wrong font sizes when using customized Windows metrics.
.: Added: Support for using Windows default fonts for listview and treeview controls in eMule's main windows. This way one can specify larger fonts for almost all eMule lists via the Windows System Metrics. Specify "UseSystemFontForMainControls=1" in "preferences.ini" to enable.
.: Fixed: Shared directory treeview control lost icons after Windows System settings were changed.
.: Fixed: Wrong font mapping for some GUI elements in non-Western locales.
-----------------------
- Mar, 17. 2008 -
-----------------------
.: Fixed: Shared Files list did not show focus rectangle for listview items.
-----------------------
- Mar, 16. 2008 -
-----------------------
.: Fixed: "Search related Files" context menu entry in search results pane was not properly enabled/disabled [Tuxman]
.: Fixed: Memory corruption for column properties in WebServer [tHeWiZaRdOfDoS]
.: Fixed: Normalized search labels in WebServer [ducho]
.: Fixed: Some search results where still shown after invoking 'Close All Search Results' [bengarchy]
.: Fixed: Enabling/Disabling the "Queued Clients" and "Known Clients" lists did not always fill/clear the list views [Xman]
.: Fixed: Toolbars in Transfere window were not showing tooltips after enabling/disabling "Queued Clients" and/or "Known Clients".
-----------------------
- Mar, 15. 2008 -
-----------------------
.: Fixed some GDI resouce leaks. [Rapid_Mule]
.: Fxied a minor possible bug in creating random numbers [leuk_he]
.: Fxied a bug in the new store searches function [netfinity]
-----------------------
- Feb, 26. 2008 -
-----------------------
.: When deleting more than 50 files the first 50 names are shown in the confirmation dialog [tHeWiZaRdOfDoS]
.: Fixed a bug in finding the senders of corrupt data which may lead to false positives [DavidXanatos]
-----------------------
- Feb, 10. 2008 -
-----------------------
.: Kad will now enforce certain limits when adding new contacts to the routing table: No more than 1 KadNode per IP, 2 similar KadNodes (same bin) from a /24 network and max 10 different KadNodes from a /24 network are allowed. This is supposed to make routing attacks against kad more difficult / resource-intensive
You can still run more than one kad client from a single IP without any problems, they just don't become part of the internal kad routing but still work without any limitations.
-----------------------
- Feb, 3. 2008 -
-----------------------
.: The download comments dialog has now a direct possibility to edit the comment spam filter, changes are instantly applied to all existing comments
.: Clients which sent comments which get filtered by the comment spam filter are now treated like message spammers (banned)
.: The ed2k: in ed2k-links is no longer case sensitive
.: When connecting to Ed2K eMule starts with a random server instead using first on in the server.met. Any sorting, priority, etc. is not affected by this
-----------------------
- Feb, 1. 2008 -
-----------------------
.: Several changes have been made to improve kads resistance against malicious keyword publishing:
.: Kad now keeps track which filenames were published by different sources for the same file and uses the most common name (instead the last published one) when responding search requests
.: Same hashs (files) which have different filesizes are now properly stored seperatly instead overwriting eachother
.: Kad calculates a rating based on how many different sources publish a file and how many files publishes a source. When responding to a search request, files with a rating below a set limit will be sent last in order to avoid that spammed files push out valid ones.
.: The Kad rating for published files is also sent in search results to be used in the future version as indicator
-----------------------
- Jan, 16. 2008 -
-----------------------
.: Added a general anti-flood-protection to kad. If Kad receives more request of a specific type from one IP than it would expect, it starts ignoring those requests and envetually banning the source. This is supposed to avoid or slow down several attack scenarios.
.: Fixed a problem with injection of DNS servers into the routing tables which were able to stay because of a porotcol mixup between kad and dns. Old sources with port 53 as kad port are ignored, new clients (0.49a+) can use port 53 as kad port again but it is not recommended [found by netfinity]
.: Fixed a bug in kad2 with publishing >4GB files [netfinity]
-----------------------
- Jan, 11. 2008 -
-----------------------
.: If you select a non-default incoming directory which already contains files, eMule notices you that those files are automatically shared by eMule
-----------------------
- Jan, 8. 2008 -
-----------------------
.: Added a filter box (like in the search results) for on-the-fly filtering of shared files into the shared files tab. This filter is supposed to help finding specific shared files, it has no effect on which files are actually published
.: Rearranged the symbols in the shared files directory tree a bit
-----------------------
- Dec, 15. 2007 -
-----------------------
.: The onlinehelp for the options dialog is now topic sensitive for all languages instead only for english (well actually it is not, but this is serverside work which will be done step by step till the release). More areas to get topic sensitive to come in the future
.: Open searches are now stored if you close eMule and restored on restart. This way you don't have to research your favourite words in case you didn't get to finish looking at the results. Can be disabled in Options->Display
-----------------------
- Dec, 2. 2007 -
-----------------------
.: Reworked Kads Firewall handling and testing:
The kad firewall state is now split into TCP and UDP. The TCP state is basically the old state, which tests if your TCP port is reachable. The UDP state is new and checks if your UDP port is reachable. For example on Full Cone NAT Routers, without portforwarding you will get TCP firewalled (as before) but UDP open (new). If you have the UDP open state, eMule doesn't needs a buddy any longer and will fully participate in the KAD network and therefore take away the overhead they caused in earlier versions (you still cannot connect to other TCP firewalled clients if you are TCP firewalled yourself).
.: The new UDP state is shown in the MyInfo field in the Server Tab. As long as the UDP firewalltest is unfinished "(unverified)" is appended
.: Clients which have the Kad UDP open state, now support direct callbacks (invoked by an UDP packet) to connect to not firewalled clients. These callbacks are faster, more reliable and use less ressources than buddy or server callbacks.
.: The new firewall test also fixes a bug / design flaw which caused eMule to always use the use the clients source UDP port, instead testing if the internal set UDP port might be the propper choice instead. This was especially a problem on Restricted Cone Routers with PAT (Port Address Translation)
-----------------------
- Nov, 29. 2007 -
-----------------------
.: Fixed bug with possible wrong local IP address in case the "BindAddr" option is used.
.: Fixed bug with missing update of details of a selected friend in friends list.
-----------------------
- Nov, 24. 2007 -
-----------------------
.: Fixed bug in tooltips which were showing certain list items partially in bold.
-----------------------
- Nov, 19. 2007 -
-----------------------
.: Added missing Unicode support for 'Static Servers' feature.
-----------------------
- Nov, 12. 2007 -
-----------------------
.: Fixed several of our listcontrols to show Windows' context menu of scrollbars
.: Added an option (Options->General) to prevent Windows from going into standby mode while eMule is running (and doing something)
-----------------------
- Nov, 11. 2007 -
-----------------------
.: Fixed bug in IRC window with channel windows opening in reverse order.
.: Fixed bug with dead servers occasionally not deleted from GUI [fox88].
.: Fixed bug with disabled E-Mail notifications on particular Windows systems [Lewpy]
.: Added showing of IRC-warning and error messages to the active channel window.
.: Added auto-activating of private IRC channel windows when self-initiating the conversation.
.: Fixed bug with extra large icons in file tooltips.
.: Fixed bug with HTTP downloads which could create a crash in case the HD is full.
.: Fixed a memory leak with failed gzip'd HTTP downloads.
-----------------------
- Nov, 07. 2007 -
-----------------------
.: Fixed garbled display of HTTP download status information
-----------------------
- October, 31. 2007 -
-----------------------
.: The messagesystem is now able to find your friends even if their IP changed if you and they are in Kad and not firewalled. This will help to stay in contact with friends longer than one session (Only works for new added/new seen friends which have Kad enabled).
.: When messaging a friend, eMule now makes sure that the userhash still matches after connecting and SecureIdent (if enabled) is passed in order to ensure that its really your friend.
-----------------------
- October, 28. 2007 -
-----------------------
.: You can now bootstrap to kad from an URL which points to a nodes.dat file (in the Kad tab)
-----------------------
- October, 22. 2007 -
-----------------------
.: In order to reduce spam messages and by this make the messagesystem more useable again, eMule now supports Captcha authentification:
If enabled, someone who messages you has first to solve a cpatcha (an image which shows letters) before the message is shown to you. Older clients who do not support captchas will be unable to message you and receive a notice about this.
-----------------------
- Jule, 11. 2007 -
-----------------------
.: Added obfuscation to the Kad UDP protocol. Kad obfuscation is part of the protocol and is unrelated to the Ed2K-Obfuscation settings
-----------------------
- June, 5. 2007 -
-----------------------
.: Fixed a bug which let Kad try to load its preferences from the old config directory location
-----------------------
- May, 16. 2007 -
-----------------------
.: Added Uyghur translation [translated by Abduqadir]